DIY Lean To Shed: Page 3

Sample Plans

Disc.	Qty.	Size
Foundation
Pressure-Treated 2×6 (Band)	****	****
Pressure-Treated 2×6 (Floor Joist)	****	****
Pressure-Treated 4×4 (Skids)	****	****
3/4 Tongue And Groove Plywood (Floor Decking)	****	****
Front Wall
2×4 (Bottom/Top Plate)	****	****
2×4 (Wall Stud)	****	****
2×4 (Header)
2×4 (Trimmer Stud)	****	****
1/2” Plywood (Header)	****	****
Back Wall
2x4 (Top/Bottom Plate)	****	****
2x4 (Wall Stud)	****	****
Side Wall
2x4 (Bottom Plate)	****	****
2×4 (Top Plate)	****	****
2×4 (Wall Studs)	****	****
2×4 (Wall Studs)	****	****
2×4 (Wall Studs)	****	****
Rafters
2×6 (Rafter)	****	****
Siding
5/8” T1-11 Exterior Siding (Front Wall)	****	****
5/8” T1-11 Exterior Siding (Back Wall)	****	****
5/8” T1-11 Exterior Siding (Side Wall)	****	****
Roof Deck
1/2” Plywood Decking (Roof Deck)	****	****
1/2” Plywood Decking (Roof Deck)	****	****
Trim/Soffit
1/4” Plywood (Soffit)	****	****
1/4” Plywood (Soffit)	****	****
1x6 (Front Top Roof Trim)	****	****
1x6 (Back Top Roof Trim)	****	****
1x6 (Side Top Roof Trim)	****	** **
1x4 (Front Corner Trim)	***	***
1x4 (Back Corner Trim)	***	***
1x4 (Back Corner Trim)	***	***
Door
1x4 (Jamb)	****	****
1x4 (Lintel)	****	****
1x4 (Stile)	***	***
1x4 (Upright)	****	****
Hardware
Roofing Felt
Roofing Staples
3-Tab Shingles
Roof Tacks
1 1/4" Galvanized Finishing Nails
3 1/2" Galvanized Nails
1 1/2" Galvanized Nails
Door Hinges and Latch

Lean To Shed 009: Sample Page: 1 2 3 4 5 6 7 8 9 10 11 12 >>

Type:	Size Depth X Width:	Price:
Lean-To Shed 009	4'x8' More Info	$8