DIY Gable Shed: Page 3
Sample Plans 10'x10'
Material/Cut List
| Disc. | Qty. | Size |
| Material for Foundation | ||
| Pressure-Treated 2×6 (Band) | 2 | 9′ 10 3/4″ |
| Pressure-Treated 2×6 (Floor Joist) | 6 | 9′ 9″ |
| Pressure-Treated 4×4 (Skid) | 3 | 9′ 10 3/4″ |
| 3/4″ Tongue And Groove Plywood (Floor Decking) | 1 | 4′x8′ |
| 3/4″ Tongue And Groove Plywood (Floor Decking) | 1 | 4′x1 10 3/4″ |
| 3/4″ Tongue And Groove Plywood (Floor Decking) | 1 | 4′x2′ |
| 3/4″ Tongue And Groove Plywood (Floor Decking) | 1 | 4′x7′ 10 3/4″ |
| 3/4″ Tongue And Groove Plywood (Floor Decking) | 1 | 2′x8′ |
| 3/4″ Tongue And Groove Plywood (Floor Decking) | 1 | 2′x1′ 10 3/4″ |
| Material for Front/Back Wall | ||
| 2×4 (Plate) | 4 | 10′ |
| 2×4 (Plate) | 2 | 9′ 5″ |
| 2×4 (Wall Stud) | 20 | 7′ 6″ |
| 2×4 (Wall Stud) | 2 | 6′ 4 1/2″ |
| 2×4 (Cripple Stud) | 4 | 10″ |
| 2×4 (Double Header) | 2 | 4′ |
| 1/2″ Plywood (Double Header) | 1 | 3 1/2″ x 4′ |
| 5/8″ T1-11 Exterior Siding | 3 | 4′x8′ |
| 5/8″ T1-11 Exterior Siding | 1 | 2′x8′ |
| 5/8″ T1-11 Exterior Siding | 2 | 3′x8′ |
| Material for Door (6′ 6″ high x 3′ 9″ wide) | ||
| 1×4 (Jamb) | 2 | 6′ 7 1/2″ |
| 1×4 (Lintel) | 1 | 4′ 6″ |
| 1×4 (Stile) | 2 | 3′ 9″ |
| 1×4 (Stile) | 1 | 3′ 2″ |
| 1×4 (Upright) | 2 | 6′ 1/2″ |
| Door Hinges and Latch | ||
| Material for Side Walls/Window | ||
| 2×4 (Wall Stud) | 12 | 7′ 6″ |
| 2×4 (Wall Stud) | 4 | 3′ 3 1/2″ |
| 2×4 (Wall Stud) | 4 | 9 1/2″ |
| 2×4 (Window Frame) | 2 | 3′ |
| 2×4 (Window Frame) | 1 | 3′ 3″ |
| 2×4 (Double Header) | 2 | 3′ 3″ |
| 1/2″ Plywood (Double Header) | 1 | 3 1/2″ x 3′ 3″ |
| 2×4 (Plate) | 4 | 9′ 3 3/4″ |
| 2×4 (Plate) | 2 | 9′ 10 3/4″ |
| 5/8″ T1-11 Exterior Siding | 4 | 4′x8′ |
| 5/8″ T1-11 Exterior Siding | 2 | 1′ 10 3/4″x8′ |
| Prefabricated Window (optional) | 1 | 3′x3′ |
| Roof | ||
| 2×4 (Rafter) | 20 |
6′ 7 1/4″ 30° miter cut both ends same direction |
| 2×4 (Rafter Cross Tie) | 6 | 10′ 60° miter cut both ends opposite direction |
| 1/2″ plywood (Gusset) | 30 | 8″x14″ |
| T1-11 exterior siding | For Truss Ends Cut To Size | |
| 1/2″ plywood (Roof Decking) | 2 | 4′x6′ 5 1/4″ |
| 1/2″ plywood (Roof Decking) | 2 | 2′x6′ 5 1/4″ |
| 1/2″ plywood (Roof Decking) | 4 | 2′ 9 3/8″x6′ 5 1/4″ |
| Trim | ||
| 1×6 (Trim) | 4 | 6′ 8 3/8″ 30° miter cut both ends same direction |
| 1×6 (Trim) | 3 | 8′ cut to size (front/back roof trim) |
| 1/4 plywood (Soffit) | 1 | 4′x8′ cut to size |
| 1×4 (Trim) | 4 | 8′ 1 3/4″ 30° miter cut on one end |
| 1×4 (Trim) | 4 | 7′ 11 3/4″ 30° bevel cut on one end |
| 1×4 (Trim) | 2 | 9′ 5″ |
| Hardware | ||
| Roofing Felt | ||
| Staples | ||
| 3-Tab Shingles | ||
| Roof Tacks | ||
| 2″ Galvanized Finishing Nails | ||
| 1 1/4″ Galvanized Finishing Nails | ||
| 3 1/2″ Galvanized Nails or Outdoor Screws | ||
| 2″ Galvanized Nails or Outdoor Screws | ||
| Silicone |
Gable Shed: Page:
| Type: |
Size
Width x Depth: |
Price: |
 |
| Gable Shed 005 |
12'x10' More info... | $12 |  |
| Gable Shed 005 |
10'x10' More info... | $6 | |
| Gable Shed 005 |
10'x8' More info... | $12 | |
| Gable Shed 005 |
8'x10' More info... | $12 | |
| Gable Shed 005 |
8'x8' More info... | $12 | |
Material Shopping List
You may also like:
DIY
Lean To Shed This shed design can
be used to put against a house or fence. Great design if you have
limited space. | 4x8 |
Gambrel
Shed Guide No area goes to waste with
this design. This shed includes a loft. |
10x10 | 10x12 | 12x10
| 12x12 |
